My cart 0

Link

DIAMOND DIAL ROMAN NUMERAL BEZEL 29 MM

Ref: WAT1451.BB0955
$4,900.00
USD

Out of stock

Zoom Zoom In
Zoom Out
DIAMOND DIAL
ROMAN NUMERAL BEZEL
29 MM

  • Functions

    11 diamonds (0.08 CT)on the dial

    12 engraved and lacquered Roman Numerals on the bezel

    Date window at 6 o’clock with 3N colored frame

    Fixed bezel capped with solid 18K 3N Yellow Gold

    Plated gold (18K 3N) crown

    Polished and faceted 18K 3N plated hour and minutes hands, with white SLN

    Polished screw-in case back

    Protruded TAG Heuer 3N logo

    Solid gold (18K 3N) central lugs

    at 3 o'clock

    Engraved, silver lacquered numerals on the bezel Engraved, silver lacquered triangle with luminescent dot at 12 o’clock Polished chimney, fine brushed base and polished studs

    Top
  • Movement

    Quartz movement

    A QUARTZ MOVEMENT
    A quartz movement is powered by a battery. Its regulator (time-measuring device) is a quartz crystal. An electrical current causes the crystal to vibrate very consistently and at a very high frequency (32,768 times per second). This gives the movement almost perfect precision (a variation of only a few seconds per month.)

    Movement performance
    TAG HEUER QUARTZ MOVEMENTS
    Quartz movements used by TAG Heuer are some of the most reliable and accurate made in Switzerland. They are also distinguished by excellent resistance to shocks and magnetic fields.

    Movement display
    TAG HEUER BATTERIES
    The batteries for TAG Heuer quartz movements have a service life of at least two years.

    Movement decoration
    END-OF-LIFE INDICATOR
    For increased security, all TAG Heuer quartz watches(except chronographs) are ?tted with an end of battery life indicator (EOL). When the battery shows signs of weakening, the seconds hand starts making four-second jumps every four seconds. However, the movement continues to display the exact time until the battery is exhausted.

    Top
  • Materials & Care

    Case
    Polished steel

    Bezel
    Solid gold 18 ct (3N)

    Strap
    Polished steel/ polished plated gold, 18 ct (3N)

    Cleaning

    To maintain the esthetic appeal of your watch and keep it in good working order, you should clean it regularly as follows:

    • First make sure the crown is fully screwed down.
    • If the seals in your TAG Heuer watch have been changed and tested at an authorised TAG Heuer service centre within the last 12 months, then you can use a soft brush with slightly soapy water to clean the case and bracelet, then rinse it with clear water and dry it with a soft cloth. If your watch is fitted with a strap made from fabric, leather, alligator or python skin, take care not to get it wet
    • If you have any doubts about the water-resistance of your watch, simply clean it with a soft brush then dry it.
    • Avoid contact with chemical products (solvents, detergents, cosmetics, etc.) They may damage the bracelet and the water-resistance gaskets.

    Condensation

    If the temperature changes suddenly, a slight amount condensation may appear under the crystal of your watch. This mist will disappear by itself and will not affect the functioning of the watch. If the condensation persists, please see your official
    TAG Heuer dealer.

    Water resistance

    Water resistance is not a permanent condition.  The rubber seals that are designed to ensure against water entry, are under constant pressure and given time will deteriorate. For this important reason we recommend that a watch should be checked annually to ensure that the seals remain intact. This thorough and extensive testing includes pressure tests and bench tests and is considered an essential element in the care and maintenance of our watches.

    Setup

    For all movements

    • Make sure that your watch is perfectly dry.
    • Move the crown carefully to make the various changes that are possible.
    • Avoid changing the date between 8:00 pm and 4.00 am.
    • Once the changes are made, push the crown back in and (depending on the model) screw it down against the case to preserve its water-resistance.

    For mechanical movements

    • When a mechanical self-winding watch is not worn for a certain amount of time, its power reserve (42 – 48 hours depending on the model) is exhausted and the watch stops. To restart it, unscrew the crown if necessary (depending on the model) and wind the movement manually by turning the crown 30- 40 times. This will give it a sufficient power reserve to function normally.
    • A non-automatic mechanical watch has to be wound every day, winding is complete when you feel the crown resist. Your TAG Heuer is then wound to the maximum. It is important not to force the crown of a hand-wound watch to avoid damaging the mechanism.

    Bracelets/Leather straps

    Straps in fabric, leather and alligator or python skin

    • Avoid all contact with water (baths, showers etc). Despite your care and attention, leather is a natural, living material and its color will fade a little over time.
    Top
  • Quality

    Quality

    The high level of TAG Heuer quality is founded on the rigourous choice and continuous monitoring of all its suppliers and their products. Throughout the manufacturing process, each component is subjected to numerous tests and controls designed to verify how carefully it has been made.

    Top
  • Authenticity

    Purchasing your watch direct from TAG Heuer is your guarentee of authenticity. Each watch has an individual, traceable serial number.

    We've partnered with trusted.com to optionally provide you with an eTitle for your time piece. Provided at no cost is your personal proof of authenticity and ownership

    To learn more about TAG Heuer and trusted.com's partnership, see our authenticity page.

    Top